General description

• Inverter-driven screw compressors
• Touch Pilot control system
• Flooded heat exchangers that are mechanically cleanable
• Can provide an evaporator leaving temperature down to 3.3°C
• Can deliver up to 50°C on the condenser side when operating as a heat pump

Low energy consumption

• Designed for high performance both at full load and at part load
• Inverter-driven twin-rotor screw compressors allow precise capacity matching of building load changes and significantly reduce unit power input, especially at part-load
• Flooded multi-pipe heat exchangers for increased heat exchange efficiency
• Electronic expansion device permits operation at a lower condensing pressure and improved utilisation of the evaporator heat exchange surface
• optimised electrical performance

Remote Management (Standard)

• Easily accessed from the internet
• Multiple remote control, monitoring and diagnostic possibilities
• Optional communication gateways
• Condenser pumps control
• Start/Stop of the machine
• Dual set-point management
• Demand limit setting
• Water pump control
• Operation visualisation
• Alarm visualisation

Remote management (EMM option)

• Extended remote control possibilities: room temperature, set-point reset, etc.

• Light-brine solution, down to -3°C
• Master/slave operation
• Single power connection point
• Evaporator pump electrical power / control circuit
• Evaporator dual pumps electrical power / control circuit
• Condenser pump power / control circuit
• Condenser insulation
• Service valve set
• Lon, J-Bus or BacNet gateway
• Condensing temperature limitation
• Control for low condensing temperature systems
• Leak detection
• Low noise level
• Fast capacity recovery