Australia
New Zealand
Greece
Toshiba’s HRV model uses exhaust air to pre-condition the incoming air, thus reducing the cooling or heating load on the system. This allows the overall capacity size of the system to be reduced.
Operates as an integral part of the Toshiba VRF system, connected via the TCC‑LINK main bus.
Air conditioners and air heat exchangers are controlled through the same VRF communication network, ensuring synchronized operation.
Control logic automatically switches between:
Heat exchanger (energy recovery) mode, and
Standard ventilation / free cooling mode
Mode selection is based on outdoor temperature conditions, optimizing energy use without manual intervention.
Coordinates ventilation airflow with VRF indoor unit operation to:
Recover exhaust air heat and humidity
Reduce cooling or heating load on the VRF system
Free cooling is activated when outdoor air conditions are favorable.
Compatible with Toshiba VRF wired controllers and centralized control systems.
VN‑M_HE units do not require standalone controllers; all functions are managed through the VRF system interface.
Designed to maintain balanced airflow and stable refrigerant system operation.
Fully synchronized with:
Indoor unit fans
Electronic expansion valves
Outdoor unit compressor operation
Intended for commercial and large‑scale VRF installations.
Operates as a system component, not as an independent ventilation or heat recovery unit.
| Document Name | Description | Document Type | Language | Action |
|---|---|---|---|---|
| Installation Manual | Installation Manual | English | Download |
Toshiba’s HRV model uses exhaust air to pre-condition the incoming air, thus reducing the cooling or heating load on the system. This allows the overall capacity size of the system to be reduced.
Toshiba’s HRV model uses exhaust air to pre-condition the incoming air, thus reducing the cooling or heating load on the system. This allows the overall capacity size of the system to be reduced.
Toshiba’s HRV model uses exhaust air to pre-condition the incoming air, thus reducing the cooling or heating load on the system. This allows the overall capacity size of the system to be reduced.
MMD-VN(K) ventilation products are using exhaust air + DX coil to pre-condition the incoming air, thus reducing the cooling or heating load and the overall size of the required air conditioning system.
MMD-VN(K) ventilation products are using exhaust air + DX coil to pre-condition the incoming air, thus reducing the cooling or heating load and the overall size of the required air conditioning system.
MMD-VN(K) ventilation products are using exhaust air + DX coil to pre-condition the incoming air, thus reducing the cooling or heating load and the overall size of the required air conditioning system.
MMD-VN(K) ventilation products are using exhaust air + DX coil to pre-condition the incoming air, thus reducing the cooling or heating load and the overall size of the required air conditioning system.
Get directed to our Business Development team to start the authorization process and discuss sales support.
Get specialized help with system sizing, load
calculation analysis, and technical data required for project design.
Request support for warranty claims,
scheduled maintenance, and genuine spare
parts ordering.
For more information : ahi@ahi-carrier.com